Replaces Hall Technologies, LLC U97-ULTRA-2B-SRefurbished Outright

CONSOLE EXTENDER

Your price:
$609.38 each
$2,264.90 Savings: $1,655.52 (73%)
Estimated to ship by 12/30 if ordered before 3:30 PM EST
CONSOLE EXTENDER
CONSOLE EXTENDER

Replaces Hall Technologies, LLC U97-ULTRA-2B-S
CONSOLE EXTENDER

Refurbished Outright
Your price:
$609.38 each
$2,264.90 Savings: $1,655.52 (73%)
Estimated to ship by 12/30 if ordered before 3:30 PM EST
Asset Information
Product Overview

The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
  • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
  • Supports DDC channel with EDID (Extended display ID)
  • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)

Technical Specs
P/N: U97-ULTRA-2B-S Key Specs
Item
CONSOLE EXTENDER
OEM
Hall Technologies, LLC
OEM #
U97-ULTRA-2B-S
Condition
Refurbished
Returnable
No
Warranty
90 Day

The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

  • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
  • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
  • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
  • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
  • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
  • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
  • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
  • Supports DDC channel with EDID (Extended display ID)
  • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)

    Product Overview

    The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

    • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
    • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
    • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
    • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
    • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
    • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
    • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
    • Supports DDC channel with EDID (Extended display ID)
    • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)

    Technical Specs
    P/N: U97-ULTRA-2B-S Key Specs
    Item
    CONSOLE EXTENDER
    OEM
    Hall Technologies, LLC
    OEM #
    U97-ULTRA-2B-S
    Condition
    Refurbished
    Returnable
    No
    Warranty
    90 Day

    The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

    • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
    • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
    • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
    • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
    • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
    • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
    • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
    • Supports DDC channel with EDID (Extended display ID)
    • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)

      Product Overview

      The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

      • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
      • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
      • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
      • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
      • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
      • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
      • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
      • Supports DDC channel with EDID (Extended display ID)
      • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)

      Technical Specs
      P/N: U97-ULTRA-2B-S Key Specs
      Item
      CONSOLE EXTENDER
      OEM
      Hall Technologies, LLC
      OEM #
      U97-ULTRA-2B-S
      Condition
      Refurbished
      Returnable
      No
      Warranty
      90 Day

      The Hall Research Technologies Model U97-Ultra-2B-S Sender is part of the U97-Ultra-2B kit and is used to extend Dual Display PC Video, Stereo Audio (amplified or line level), RS-232, and up to 3 independent USB ports to a remote location up to 500 feet away on any Category Cable (CAT5e/6 etc).

      • Combines the functions of U97-H2, UU2X4, two SKU-RGB, DVC-3 video test pattern generator and more
      • Eliminates the need for Utility Box (Receiver includes a guard plate that goes over all the connectors with zip-tie provisions)
      • Does not require external power supply (built-in supply with standard 110 - 240 VAC IEC320 jack)
      • Includes 2 "Direct" USB ports (DR1 & DR2), and a Standard with Hub at receiver
      • DB15 connector for Amplified audio input and loop output at the sender as well as DB15 output at the receiver to directly drive passive speakers
      • Built-in video Skew Correction on both video channels. This corrects the lacks of RGB convergence when long Cat6 cables are used. Eliminates the need to use special low-skew UTP cables for long runs
      • Built-in Test pattern generator for long cable compensation (High Frequency Gain) and Skew correction
      • Supports DDC channel with EDID (Extended display ID)
      • USB Support - High Speed devices (12Mb/s), Low Speed devices (1.5Mb/s), High Speed devices on DR1 and DR2 only (480Mb/s)