Aftermarket Flat Rate Repair Repair

REPAIR - MINDRAY DATASCOPE GAS MODULE II

Your price:
$1,500.00 eachRepairs are generally completed within 9 days once received by the vendor
REPAIR - MINDRAY DATASCOPE GAS MODULE II
REPAIR - MINDRAY DATASCOPE GAS MODULE II

REPAIR - MINDRAY DATASCOPE GAS MODULE II

Aftermarket Flat Rate Repair
Your price:
$1,500.00 each
Repairs are generally completed within 9 days once received by the vendor
Asset Information

Flat Rate does not include missing or damaged cosmetic parts or accessories!

Product Overview

Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

  • 200 mL/min sample flow rate
  • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
  • 2.5-second sampling delay
  • Water trap that removes water and impurities from the patient sample
  • Analyzes patient sample at a fixed rate

Performance

  • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
  • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
  • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
  • Display Update Rate: Breath-by-Breath
  • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
  • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
  • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

Pneumatic

  • Technology: Side-stream gas sampling
  • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
  • Pump: Flow controlled dual membrane
  • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
  • Occlusion Alarm: Actual flow < 40 ml/min
  • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
  • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
  • Reference Measurement Duration: Typical 5 s, Max 9 s
  • Purge Cycle: Automatic when occlusion detected

Technical Specs
P/N: GAS MODULE II REPAIR Key Specs
Item
REPAIR - MINDRAY DATASCOPE GAS MODULE II
OEM
Mindray North America
OEM #
GAS MODULE II REPAIR
Condition
Aftermarket Flat Rate Repair
Returnable
Yes
Warranty
6 Month
Fitments
Certifications
ISO 13485 Medical DevicesISO 13485 Medical Devices

Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

  • 200 mL/min sample flow rate
  • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
  • 2.5-second sampling delay
  • Water trap that removes water and impurities from the patient sample
  • Analyzes patient sample at a fixed rate

Performance

  • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
  • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
  • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
  • Display Update Rate: Breath-by-Breath
  • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
  • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
  • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

Pneumatic

  • Technology: Side-stream gas sampling
  • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
  • Pump: Flow controlled dual membrane
  • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
  • Occlusion Alarm: Actual flow < 40 ml/min
  • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
  • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
  • Reference Measurement Duration: Typical 5 s, Max 9 s
  • Purge Cycle: Automatic when occlusion detected

    • Mindray North America
      • GAS MODULE
    Product Overview

    Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

    • 200 mL/min sample flow rate
    • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
    • 2.5-second sampling delay
    • Water trap that removes water and impurities from the patient sample
    • Analyzes patient sample at a fixed rate

    Performance

    • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
    • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
    • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
    • Display Update Rate: Breath-by-Breath
    • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
    • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
    • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

    Pneumatic

    • Technology: Side-stream gas sampling
    • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
    • Pump: Flow controlled dual membrane
    • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
    • Occlusion Alarm: Actual flow < 40 ml/min
    • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
    • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
    • Reference Measurement Duration: Typical 5 s, Max 9 s
    • Purge Cycle: Automatic when occlusion detected

    Technical Specs
    P/N: GAS MODULE II REPAIR Key Specs
    Item
    REPAIR - MINDRAY DATASCOPE GAS MODULE II
    OEM
    Mindray North America
    OEM #
    GAS MODULE II REPAIR
    Condition
    Aftermarket Flat Rate Repair
    Returnable
    Yes
    Warranty
    6 Month
    Fitments
    Certifications
    ISO 13485 Medical DevicesISO 13485 Medical Devices

    Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

    • 200 mL/min sample flow rate
    • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
    • 2.5-second sampling delay
    • Water trap that removes water and impurities from the patient sample
    • Analyzes patient sample at a fixed rate

    Performance

    • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
    • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
    • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
    • Display Update Rate: Breath-by-Breath
    • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
    • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
    • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

    Pneumatic

    • Technology: Side-stream gas sampling
    • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
    • Pump: Flow controlled dual membrane
    • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
    • Occlusion Alarm: Actual flow < 40 ml/min
    • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
    • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
    • Reference Measurement Duration: Typical 5 s, Max 9 s
    • Purge Cycle: Automatic when occlusion detected

      • Mindray North America
        • GAS MODULE
      Product Overview

      Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

      • 200 mL/min sample flow rate
      • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
      • 2.5-second sampling delay
      • Water trap that removes water and impurities from the patient sample
      • Analyzes patient sample at a fixed rate

      Performance

      • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
      • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
      • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
      • Display Update Rate: Breath-by-Breath
      • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
      • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
      • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

      Pneumatic

      • Technology: Side-stream gas sampling
      • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
      • Pump: Flow controlled dual membrane
      • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
      • Occlusion Alarm: Actual flow < 40 ml/min
      • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
      • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
      • Reference Measurement Duration: Typical 5 s, Max 9 s
      • Purge Cycle: Automatic when occlusion detected

      Technical Specs
      P/N: GAS MODULE II REPAIR Key Specs
      Item
      REPAIR - MINDRAY DATASCOPE GAS MODULE II
      OEM
      Mindray North America
      OEM #
      GAS MODULE II REPAIR
      Condition
      Aftermarket Flat Rate Repair
      Returnable
      Yes
      Warranty
      6 Month
      Fitments
      Certifications
      ISO 13485 Medical DevicesISO 13485 Medical Devices

      Gas Module II is a companion to several patient monitors. The Gas Module II, commonly called the Datascope GM2, is capable of automatically identifying and measuring five anesthetic agents (Desflurane, Enflurane, Sevoflurane, Halothane, and Isoflurane, as well as N20, CO2, and O2. This unit monitors all gases via sidestream sampling.

      • 200 mL/min sample flow rate
      • Uses a non-dispersive infrared analyzer measuring the absorption of the gas sample at seven infrared wavelengths
      • 2.5-second sampling delay
      • Water trap that removes water and impurities from the patient sample
      • Analyzes patient sample at a fixed rate

      Performance

      • Sampling Rate: 200 ± 20 ml/min (with sampling line ≤ 6 meters, under normal conditions)
      • Sampling Delay: 2.5 seconds (with a 3-meter sampling line)
      • Total System Response Time: 2.9 seconds (with a 3-meter sampling line, including sampling delay and rise time)
      • Display Update Rate: Breath-by-Breath
      • Compensation: Automatic for pressure, CO2-N2O and CO2-O2 collision broadening the effect
      • Warm-up Time: Maximum 2 minutes to operation with CO2, O2, and N2O; 5 minutes to the operation of anesthetic agents; 30 minutes for full accuracy specifications
      • Autozeroing Interval: At startup and at 2, 4, 10, 15, 30, 45, and 60 minutes of operation. Every 60 minutes thereafter

      Pneumatic

      • Technology: Side-stream gas sampling
      • Pneumatic Modes: Room air reference measurement: Automatic; Sampling system purge: Automatic
      • Pump: Flow controlled dual membrane
      • Gas sampling rate: with DRYLINE™ Water Trap, Adult/Ped: 200 ml/min; with DRYLINE™ Water Trap, Neonate: 120 ml/min
      • Occlusion Alarm: Actual flow < 40 ml/min
      • Room Air Reference Measurement: Automatic when gas measurement bench temperature change is > 1°C or time since last ref. measurement is > 4 h
      • Reference Measurement Interval: ISO Accuracy Mode > 30 s Full Accuracy Mode > 4h
      • Reference Measurement Duration: Typical 5 s, Max 9 s
      • Purge Cycle: Automatic when occlusion detected

        • Mindray North America
          • GAS MODULE