Sign InRegister
Departments
Solutions
PRO
Browsing History
Main Menu
Batteries
Biomedical
Cables & Sensors
Computers & Electronics
Facilities & Workspaces
Laboratory
Lighting & Bulbs
Medical Imaging
Minor Equipment
On-Site Service
Repair
Training
Shop by OEM
Shop by Model
Main Menu
Provider
Supplier
Government
Partners
GPOs
Resources
About
Main Menu
About PartsSource PRO
On-Demand Parts
On-Demand Service
Repair & Service Agreements
Main Menu
My Account
Orders
Parts Quotes
Depot Repairs & Quotes
On-Site Service
Submit Work Orders
Exchanges & Returns
Settings
Main Menu
Month over Month Spend
Prior Rebates
Main Menu
My Lists
Create New List
OEM#: N234-MI-1005New OEM Original Outright
CAT6 PATIENT CARE VICINITY MEDICAL ETHERNET ISOLATOR - GREY by Tripp Lite
Your price:
$252.21 each $552.28 Savings: $300.07 (54%)
Estimated to ship by 01/01 if ordered before 12:30 PM EST
View All
OEM#: N234-MI-1005CAT6 PATIENT CARE VICINITY MEDICAL ETHERNET ISOLATOR - GREY by Tripp Lite
New OEM Original Outright
Your price:
$252.21 each
$552.28 Savings: $300.07 (54%)
Estimated to ship by 01/01 if ordered before 12:30 PM EST
Asset Information
Lifetime Limited Warranty
ADD TO LIST
Product Overview
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
Technical Specs
P/N: N234-MI-1005 Key Specs
Item
CAT6 PATIENT CARE VICINITY MEDICAL ETHERNET ISOLATOR - GREY
OEM
Tripp Lite
OEM #
N234-MI-1005
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Certifications
CE, RoHS, CE, IEC 60601-1, IEEE 802.3ab, IEEE 80.3, REACH
Color
Gray
Connector
RJ-45 - female
Connector (Second End)
RJ-45 - female
Material
Plastic
Operating Temperature Range
14° to 185°F (-10° to 85°C)
Type
Network coupler - CAT 6 - IEEE 802.3ab
Equivalents
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
- N234-MI-1005: Eaton Corporation: OEM Acquisition
Product Overview
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
Technical Specs
P/N: N234-MI-1005 Key Specs
Item
CAT6 PATIENT CARE VICINITY MEDICAL ETHERNET ISOLATOR - GREY
OEM
Tripp Lite
OEM #
N234-MI-1005
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Certifications
CE, RoHS, CE, IEC 60601-1, IEEE 802.3ab, IEEE 80.3, REACH
Color
Gray
Connector
RJ-45 - female
Connector (Second End)
RJ-45 - female
Material
Plastic
Operating Temperature Range
14° to 185°F (-10° to 85°C)
Type
Network coupler - CAT 6 - IEEE 802.3ab
Equivalents
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
- N234-MI-1005: Eaton Corporation: OEM Acquisition
Product Overview
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
Technical Specs
P/N: N234-MI-1005 Key Specs
Item
CAT6 PATIENT CARE VICINITY MEDICAL ETHERNET ISOLATOR - GREY
OEM
Tripp Lite
OEM #
N234-MI-1005
Condition
New OEM Original
Returnable
No
Warranty
Other (See Notes)
Certifications
CE, RoHS, CE, IEC 60601-1, IEEE 802.3ab, IEEE 80.3, REACH
Color
Gray
Connector
RJ-45 - female
Connector (Second End)
RJ-45 - female
Material
Plastic
Operating Temperature Range
14° to 185°F (-10° to 85°C)
Type
Network coupler - CAT 6 - IEEE 802.3ab
Equivalents
Isolate Medical Equipment on an Ethernet Network to Enhance Patient Safety
Medical Ethernet isolator protects staff, patients and medical technology equipment in patient care vicinities from dangerous leakage currents that can travel through a copper-based Ethernet network. It effectively isolates medical equipment to protect patients, yet allows data to flow at Gigabit Ethernet speeds.
Install In-Line on an Ethernet Network
This Ethernet network isolator has two RJ45 ports and acts as a coupler, joining two tested and approved Cat6 cables to complete the connection between compatible medical equipment and a computer or data network. Because the cables are removable, you can replace a failed cable without replacing the isolator. Completely plug and play, this RJ45 isolator does not require software, drivers or a power supply.
- Ideal for premise wiring, voice/data networking, telecommunications and Ethernet connections
- Connect an EMG measuring station with an analysis computer in a doctor’s consulting room
- Connect the PC of a prolonged EEG system to a clinic’s network
- Works with cost-effective
- Connector(1 on front/1 on rear)
- ESD protection 16kV
- 1Gbps network speed
System Requirements
- Network components that comply with IEEE 802.3 or IEEE 802.3ab (10/100/1000BASE-T, twisted-pair)
- Cat6 network cable
- N234-MI-1005: Eaton Corporation: OEM Acquisition