OEM#: 4081New OEM Original Outright

CERTIFIER PLUS HIGH FLOW MODULE by TSI Incorporated

Your price:
$2,703.25 eachEstimated to ship by 04/18 if ordered before 12:30 PM EST
HomeTSI Incorporated4081
CERTIFIER PLUS HIGH FLOW MODULE by TSI Incorporated
CERTIFIER PLUS HIGH FLOW MODULE by TSI Incorporated
CERTIFIER PLUS HIGH FLOW MODULE by TSI Incorporated

OEM#: 4081
CERTIFIER PLUS HIGH FLOW MODULE by TSI Incorporated

New OEM Original Outright
Your price:
$2,703.25 each
Estimated to ship by 04/18 if ordered before 12:30 PM EST
Asset Information
Are you an existing customer? Sign in to access your account.
ADD TO LIST
Product Overview

The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

Features
  • Durable design
Technical Specs
P/N: 4081 Key Specs
Item
CERTIFIER PLUS HIGH FLOW MODULE
OEM
TSI Incorporated
OEM #
4081
Condition
New OEM Original
Returnable
No
Warranty
24 Month
Connectors
22 mm female ISO taper (inlet) x 22 mm male ISO taper (outlet)
Country of Origin
USA
Dimensions
8.07 in L x 4.17 in W x 2.9 in H
Flow Range
-200 to 300 Standard L/min
Gas Calibrations
Air; Oxygen; Air/Oxygen Mix; Nitrogen; CO2
Gas Conditions
STP; ATP; BTPS; BTPD; or User-Defined

The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

    Product Overview

    The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

    Features
    • Durable design
    Technical Specs
    P/N: 4081 Key Specs
    Item
    CERTIFIER PLUS HIGH FLOW MODULE
    OEM
    TSI Incorporated
    OEM #
    4081
    Condition
    New OEM Original
    Returnable
    No
    Warranty
    24 Month
    Connectors
    22 mm female ISO taper (inlet) x 22 mm male ISO taper (outlet)
    Country of Origin
    USA
    Dimensions
    8.07 in L x 4.17 in W x 2.9 in H
    Flow Range
    -200 to 300 Standard L/min
    Gas Calibrations
    Air; Oxygen; Air/Oxygen Mix; Nitrogen; CO2
    Gas Conditions
    STP; ATP; BTPS; BTPD; or User-Defined

    The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

      Product Overview

      The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.

      Features
      • Durable design
      Technical Specs
      P/N: 4081 Key Specs
      Item
      CERTIFIER PLUS HIGH FLOW MODULE
      OEM
      TSI Incorporated
      OEM #
      4081
      Condition
      New OEM Original
      Returnable
      No
      Warranty
      24 Month
      Connectors
      22 mm female ISO taper (inlet) x 22 mm male ISO taper (outlet)
      Country of Origin
      USA
      Dimensions
      8.07 in L x 4.17 in W x 2.9 in H
      Flow Range
      -200 to 300 Standard L/min
      Gas Calibrations
      Air; Oxygen; Air/Oxygen Mix; Nitrogen; CO2
      Gas Conditions
      STP; ATP; BTPS; BTPD; or User-Defined

      The Certifier™ Plus High Flow Module is one half of the Certifier™ Plus Test Systems 4080-S and 4080-F and communicates measurements to the Interface Display Module. The high flow module contains calibrated sensors for bi-directional flows, barometric pressure (375 to 1200 mmHg), low pressure (-25 to 150 cm H2O), high pressure (-10 to 150 psig), and temperature (5 to 40°C ). The high flow module also includes a 3.5 mm mono audio jack capable of accepting an oxygen sensor (from the optional 4073 kit) to measure oxygen concentrations. A flow module (Certifier™ Plus High Flow Module or Certifier™ Plus Low Flow Module 4082) must be used in conjunction with either the Certifier™ Plus Display Interface Module 4089 or Certifier™ FA+ Interface Module 4088 (discontinued). A Certifier™ Module may also be purchased individually (not as part of a Certifier™ Test System 4080-S or 4080-F) to replace an existing flow module or to have an additional flow module to maintain up-time if other flow modules are unavailable.